RR-410 RP2 Semi-Static Kernmantle Rope 10.5 mm 30 m

The PGTEC RR-410 RP2 is a 10.5 mm semi-static kernmantle rope certified to EN 1891 type A, supplied in a compact 30 m coil for shorter work, rescue-assist and edge-protection tasks where a full 50 m line is unnecessary. Like the RP1, it pairs a high-strength parallel polyamide core with a tight navy polyester sheath, but the slimmer 10.5 mm diameter makes it lighter on the harness, quicker to coil and easier to handle in tight rigs such as confined-space entry lines, rescue-bag backups and short facade sections. Minimum breaking strength remains above 22 kN, and the semi-static construction keeps stretch low so that work positioning and rescue loads do not bounce. The RP1/RP2 pair lets rope-access teams standardise on one accessory range while choosing the length and diameter that match each job: 50 m x 11 mm for the main work line, 30 m x 10.5 mm for the backup, rescue or attendant line. The navy sheath is UV and abrasion treated, the ends are heat-sealed and whipped, and every coil carries a serial-number traceability tag. PGTEC supplies the RP2 as a neat hand coil with a stainless carabiner tie, an inspection leaflet and a three-year warranty. Typical uses include confined-space attendant lines, rescue-bag backup ropes, short roof-edge fall-arrest runners, arborist rigging lines and secondary lines for the RS1 rescue descent device.