LC-212 AS2 Endless Round Anchor Sling 1.0 m

The PGTEC LC-212 AS2 is an endless round anchor sling certified to EN 795 and EN 354, designed for quick, reusable tie-off around steel columns, pipes, roof trusses and concrete edges when a flat sling would be too long or too bulky. The sling is a 1.0 m circumference tubular constructed from a continuous core of parallel high-tenacity polyester filaments covered by a woven navy-blue protective sleeve. Because the load-bearing core is a continuous loop with no sewn ends, the strength is consistent around the entire circumference and the sling can be twisted, wrapped or doubled around a member without creating a stress concentration at a stitch line. The woven sleeve protects the inner core from abrasion, UV and chemicals, and because the sleeve is load-sharing in this construction, a small cut in the outer cover does not immediately condemn the sling; inspection focuses on exposed core fibres, burns and chemical staining. Breaking strength is 22 kN along the loop, suitable for a single-user fall-protection anchor. The 1.0 m circumference is short enough to sit neatly around a steel column or pipe, yet long enough to double back on itself and clip a karabiner through both sides. The AS2 is commonly used with the PGTEC CK4 oval karabiner or CK1 screwgate karabiner to create compact anchor points in confined spaces, on scaffolding, on maintenance access platforms and on process piping. Each sling is batch-numbered, proof-load tested and CE labelled.