LC-211 AS1 Flat Polyester Anchor Sling 1.5 m

The PGTEC LC-211 AS1 is a flat polyester anchor sling certified to EN 795 and EN 354, used to create a temporary tie-off point around a steel beam, concrete column, roof truss or tree where no engineered anchor exists. The sling is a loop of 40 mm wide navy-blue high-tenacity polyester webbing, 1.5 m long end-to-end, with reinforced bar-tack stitching at both eye loops to distribute load across multiple layers. The flat webbing profile wraps smoothly around sharp edges without concentrating stress, and the polyester material is UV-stabilised, water-resistant and resistant to most industrial chemicals. Breaking strength is rated at 22 kN along the loop, which is well above the EN 795 requirement for a single-user anchor connector. The AS1 is the standard anchor sling used with the PGTEC CK4 oval karabiner and CK1 screwgate karabiner to build tie-off points on steel structures during construction, maintenance, rescue and rope-access work. It is also used as a back-tie on self-retracting lifelines when the natural anchor position is too far from the work area. Because it is a simple webbing loop, the AS1 has no moving parts to wear, no springs to corrode and no gate to forget to lock; inspection is limited to visual checks for cuts, burns, UV damage and chemical staining. Each sling is batch-numbered, proof-load tested and CE labelled, and is supplied with an inspection label showing length, width and breaking strength.