LC-210 WL2 Adjustable Positioning Lanyard with Tie-Off Ring 1.5 m

The PGTEC LC-210 WL2 is an adjustable work-positioning lanyard built to EN 354 and EN 358, designed to hold a worker in position at height so both hands are free for drilling, bolting, welding or glazing. The body is a 1.5 m length of 30 mm navy-blue polyester webbing running through an aluminium adjuster, with a forged steel tie-off D-ring stitched into the centre, and an aluminium screwgate karabiner at each end. The centre D-ring is the key feature: it accepts a secondary absorber lanyard or self-retracting lifeline, giving the worker a stable positioning support while the primary fall-protection remains connected. The adjuster lets the user set the exact working distance from the anchor so that the body is supported rather than hanging from the harness; this reduces leg fatigue during long shifts on steel beams, window frames, curtain-wall units or bridge girders. The WL2 is also used as a tie-back lanyard for maintenance on lift shafts, pylons and transmission towers, where the worker must lean outwards to reach components while still being prevented from slipping. Rated for users up to 135 kg including tools, the webbing is UV-stabilised and the aluminium hardware keeps total weight around 320 g. Every unit is bar-tacked, proof-load tested and batch-numbered.