LC-209 WL1 Adjustable Work-Restraint Lanyard 2 m

The PGTEC LC-209 WL1 is an adjustable work-restraint lanyard certified to EN 354, designed to keep a worker physically prevented from reaching an unprotected edge rather than arresting a fall after one has already started. The body is a 2 m braided kernmantle rope in navy and white with a 12 mm diameter, running through a forged aluminium rope-grab adjuster that slides along the rope and locks under load, with an aluminium snap hook at the harness end and a large aluminium scaffold hook at the anchor end. Because the WL1 is a restraint device, no energy absorber is fitted: the rope is dimensioned so that the worker cannot walk to the edge, which keeps the kit lighter, cheaper and easier to inspect. The adjuster lets the length be set to the exact distance between the harness D-ring and the anchor, removing slack and preventing the worker from leaning out or stepping over. The navy-and-white colour scheme is highly visible against steel, concrete and roofing, making it easy for site supervisors to confirm that the correct restraint lanyard is in use rather than an absorber. The WL1 is widely used on flat roofs, parapet work, edge protection on mezzanines, truck and wagon inspection, and on any task where the anchor point is close to the work area. Rated for users up to 135 kg including tools, the unit is proof-load tested, bat-marked and CE labelled.