HA-105 N358 Work-Positioning Belt Harness

The PGTEC HA-105 N358 is a work-positioning belt harness certified to EN 358, designed for workers who need to be held in a fixed working position on a pole, tower, mast or steel column while leaving both hands free for tools. The device consists of a wide padded waist belt with two lateral D-rings for connecting an adjustable positioning lanyard, combined with a dorsal fall-arrest D-ring and a leg loop to prevent the wearer from rotating out of the belt in an emergency. The belt is 115 mm wide, padded with closed-cell EVA foam and covered in breathable polyester mesh, and is adjusted with two zinc-plated cam buckles on the front. The lateral D-rings are forged anodised aluminium rated to 15 kN, and the dorsal fall-arrest ring is rated to 22 kN. The webbing is 44 mm navy-blue polyester. Maximum user weight is 140 kg. PGTEC positions the N358 as a budget-conscious positioning harness for utility-line mechanics, steel-frame fitters, scaffolders working from a fixed tie-off point, and warehouse maintenance crews operating on elevated walkways where fall arrest is provided by a separate harness or by a permanent restraint system. Each unit is individually serialised, supplied with a multilingual instruction manual covering the difference between positioning, restraint and fall arrest, and shipped with an inspection record card.