HA-102 N362 Two-Point Fall-Arrest Harness with Dorsal & Chest D-Rings

The PGTEC HA-102 N362 is a two-point full-body fall-arrest harness certified to EN 361, designed for working at height where the user needs both a dorsal rear attachment point and a sternal chest attachment point. The chest D-ring is required when the user climbs ladders or fixed vertical tracks where a dorsal connection would place the worker in an unsupported leaning-back position after a fall. The harness is built from 44 mm navy-blue polyester webbing, with forged aluminium dorsal and sternal D-rings rated at 22 kN minimum breaking strength. The chest webbing is joined by a quick-connect buckle that allows fast donning and doffing without threading, and the leg straps are fitted with zinc-plated fast adjusters so the wearer can size the harness in under thirty seconds. The N362 accepts a combined user, clothing and tool load up to 140 kg and is designed to be used with an EN 354 shock-absorbing lanyard or an EN 360 retractable block. Reflective sewing thread on the shoulder straps improves visibility on low-light construction sites. PGTEC targets this harness at steel erectors, roofers, wind-turbine service technicians and telecom tower climbers who move between horizontal work and vertical ladder access on a single shift. Every unit is individually serialised and supplied with an inspection record card and a multilingual instruction manual covering donning, pre-use checks and post-arrest retirement criteria.