AL-305 HL2K Horizontal Cable Lifeline Kit 18 m

The PGTEC HL2K is a complete horizontal cable lifeline kit that creates a continuous, certified fall-protection line across flat roofs, walkways and maintenance routes, allowing two workers to move freely along the edge while remaining 100 per cent tied off. The 18 m kit ships as one package containing two galvanized steel end posts with navy-blue powder-coated end stops, an 8 mm galvanized steel wire rope, a tensioning device, a travelling rope grab and all fixing hardware needed to anchor the line to concrete or steel. With a system rated above 22 kN at the end anchors and designed for up to two simultaneous users weighing up to 150 kg each, the HL2K is engineered to absorb the arresting forces of a fall without loading the roof structure beyond its design. The rope grab follows the worker along the cable as they walk, so they never need to unclip and never leave themselves unprotected near a parapet or roof edge. A built-in energy absorber limits end-post load, and the tensioner lets the installer remove sag seasonally. Typical installations run along factory roofs, warehouse edges, loading docks and plant walkways where staff must cross exposed routes for inspection and cleaning. Supplied as a numbered kit with an installation diagram and a system certificate, the PGTEC HL2K gives facilities and safety managers a documented EN 795 horizontal lifeline that keeps roof teams tied off for the whole route.